Packaging guide

ESD Boxes vs Black Containers: Resistance Is Not Discharge Shielding

Distinguish colour, resistance requirements and discharge shielding when specifying ESD containers and their inserts.

Key considerations

  1. ESD means electrostatic discharge. The term ESD box describes a protection purpose, not a model specification that can be established from appearance. A black container is not automatically suitable for static-sensitive items.
  2. Resistance does not answer every protection question. A resistance range alone does not demonstrate tested discharge shielding. State resistance, shielding and mechanical requirements separately.
  3. The operating area matters. EOS/ESD Association guidance identifies discharge shielding as a consideration when moving susceptible items outside an electrostatic protected area. Determine the pack from the application requirements rather than assuming an ESD outer box is sufficient.
  4. Review all contact materials. Reels, partitions, EVA and other foam inserts need their own suitability checks. Ordinary inserts do not acquire ESD properties merely by being placed inside an ESD container.
  5. The supplier commits to surface and volume resistance within 1×10⁵–1×10¹¹ Ω for its ESD series, subject to agreed methods, conditions and acceptance. This is not a claim of series-wide discharge-shielding tests or international certification.
  6. Provide device type, operating area, handling route and any existing packaging specification. Check evidence for requested shielding, tests or certifications before agreeing the quotation and supply scope.

Related solution

Need a structure designed for your exact part?

Explore the solution

ESD Plastic Turnover Boxes →

Thickened plastic freezer square tray, food tray, parts box, material box, turnover box, tool hardware box, material bin, virgin material →

SMT Reel Storage and Handling Boxes →