Key considerations
- Define the task first: fixed tool positioning, part separation and cushioning are different requirements. Evaluate EVA, EPE and corrugated plastic divider designs around the part and process rather than declaring one material universally better.
- Check geometry and permitted contact. Ask about shaped foam cavities for positioning or divider layouts for regular compartments. Complex shapes and sensitive surfaces need drawing and sample review.
- Cushioning depends on the actual grade and structure. Confirm density, thickness, support area, loading and transport conditions. A foam label is not a no-damage guarantee, and another manufacturer’s grade data is not this supplier’s specification.
- Consider combinations where useful. The container, partitions and contact layer perform different tasks. Review feasibility, access and empty-return handling before agreeing a combined design and its supply conditions.
- Specify ESD requirements for every contact material. Ordinary EVA, EPE and plastic board are not automatically ESD materials. Resistance data alone is not discharge-shielding evidence.
- Compare samples using the same parts and handling conditions. Check access, contact marks and lid closure before approving the design. Dividers support a one-piece sample; other materials’ sample charges, MOQ and lead time require confirmation.
Related solution
Need a structure designed for your exact part?
Explore the solution