Packaging guide

Specifying EVA Foam Inserts for Tools and Precision Parts

Prepare geometry, support and access requirements for EVA inserts without assuming ordinary EVA has ESD properties.

Key considerations

  1. Specify the grade and construction. EVA means ethylene-vinyl acetate copolymer. Density, hardness, thickness and conversion format depend on the selected foam; the material name alone does not establish protective performance.
  2. Define the movement to be restrained and acceptable support areas. Tool positioning and precision-part packaging need drawings or photographs, weight and usable case dimensions. Identify areas that must not be loaded.
  3. Plan removal as well as retention. Sample checks should cover finger access, protrusions and lid clearance. Excessively tight cavities may make handling difficult; confirm a feasible design for the actual geometry.
  4. Ordinary EVA is not automatically ESD foam. Public manufacturer information identifies static generation as a possibility for some ordinary EVA grades. Request data for the proposed material rather than applying an ESD outer-container claim to the insert.
  5. Confirm chemical contact, cleaning, service life and transport performance separately. Provide actual oil, coating, cleanliness and cosmetic requirements. Do not assume zero scratching or a fixed reuse count without relevant validation.
  6. This is EVA selection guidance, not confirmation of every grade or capability. Send part information, dimensions, quantity and performance requirements to check material availability, conversion and sample conditions.

Related solution

Need a structure designed for your exact part?

Explore the solution

EPE Foam Inserts →

Custom anti-static box corrugated plastic dividers circuit electronic component part box returnable box divider sheet partition knife card corrugated plastic sheet →